32
session in state; If is not enabled, the device will automatically ignores all receive multicast RTP stream.
Web Settings:
The multicast SS priority is higher than that of EE, the highest priority.
Note: when a multicast session key by multicast, multicast sender and receiver will beep.
Listener configuration
Blue part (name)
The "group of 1" and "2" and "3" are you setting monitoring multicast name, answer time is displayed
on the screen, if you do not set the screen will display the IP: port directly.
Purple part (host: port)
Is a set of addresses and ports to listen, separated by a colon.
Pink part (index / priority)
Multicast is a sign of listening, but also the monitoring multicast priority, the smaller the number of
higher priority.
Red part (priority)
Is the general call, non multicast call priority, the smaller the number of high priority, the following will
explain how to use this option:
The purpose of setting monitoring multicast "group 1" or "2" or "3" launched a multicast call.
All equipment has one or more common non multicast communication.
When you set the Priority for the disable, multicast any level will not answer, multicast call is rejected.
when you set the Priority to a value, only higher than the priority of multicast can come in, if you set