voptech DP31 User Manual Download Page 45

Page: 45 / 55

Enable TR069

Enable/Disable TR069 configuration

Enable TR069

Warning Tone

Enable or disable TR069 Warning Tone

ACS Server Type

Select Common or CTC ACS Server Type.

ACS Server URL

ACS Server URL.

ACS User

User name for ACS.

ACS Password

ACS Password.

TR069 Auto

Enable/Disable TR069 Auto Login.

b) SYSLOG

Syslog is a protocol used to record log messages using a client/server mechanism. The Syslog server

receives the messages from clients, and classifies them based on priority and type. Then these messages

will be written into a log by rules which the administrator has configured.

There are 8 levels of debug information.

Level 0: emergency; System is unusable. This is the highest debug info level.

Level 1: alert; Action must be taken immediately.

Level 2: critical; System is probably working incorrectly.

Level 3: error; System may not work correctly.

Level 4: warning; System may work correctly but needs attention.
Level 5: notice; It is the normal but significant condition.

Level 6: Informational; It is the normal daily messages.

Level 7: debug; Debug messages normally used by system designer. This level can only be displayed via

telnet.

Field Name

Explanation

Summary of Contents for DP31
























































Search results

Summary of Contents for DP31

Reviews:

Related manuals for DP31

Brands by name

Popular brands

voptech DP31, User Manual

Search results

Summary of Contents for DP31

Reviews:

Related manuals for DP31

Brands by name

Popular brands