31
Using multicast functionality can be simple and convenient to send notice to each member of the
multicast, through setting the multicast key on the device, sending multicast RTP stream to
pre-configured multicast address. By on the device configuration monitoring multicast address, listen to
and play the group multicast address send RTP stream.
MCAST Settings
Equipment can be set up to monitor up to 10 different multicast address, used to receive the
multicast address send multicast RTP stream.
In the Web interface setting change equipment receiving multicast RTP stream processing mode are:
set the ordinary priority and enable page priority.
Priority:
In the drop-down box to choose priority of ordinary calls the priority, if the priority of the incoming
flows of multicast RTP, lower precedence than the current common calls, device will automatically ignore
the group RTP flow. If the priority of the incoming flow of multicast RTP is higher than the current
common calls priority, device will automatically receive the group RTP stream, and keep the current
common calls in state. You can also choose to disable in the receiving threshold drop-down box, the
device will automatically ignore all local network multicast RTP stream.
The options are as follows:
1-10: The definition of common call priority, 1 is the most advanced, most low 10
Disable: ignore all incoming stream multicast RTP
Enable the page priority:
Page determines the priority equipment current in multicast session, how to deal with the new
receiving multicast RTP stream, enabling the Page switch priority, the device will automatically ignore the
low priority of multicast RTP stream, receive priority multicast RTP stream, and keep the current multicast
