Volvo XC90 Twin Engine 2019, Owner'S Manual

Page: 324 / 700

||
DRIVER SUPPORT
322
Driver display
Indication of speeds.
Stored speed
Speed of vehicle ahead
Current speed of your car
Related information
•
Pilot Assist (p. 319)
Activating and starting Pilot Assist
Pilot Assist must first be activated and then
started to be able to control speed and distance
and to give steering assistance.
NOTE: The illustration is schematic - details may vary
depending on car model.
In order to start the Pilot Assist it is required that:
•
The driver's seatbelt must be buckled and
the driver's door must be closed.
•
There must be a vehicle (the "target vehicle")
within reasonable distance in front of the car,
or the current speed must be at least
15 km/h (9 mph).
•
For cars with manual gearbox. Speed must
be at the lowest 30 km/h (20 mph).
With the adaptive cruise control in standby
mode :
1. Press the steering wheel button
▶
(6).
> The
symbol changes to Pilot Assist
in standby mode (8).
2. Press the steering wheel button
(2).
> Pilot Assist is started and current speed is
stored, which is shown with figures in the
centre of the speedometer.
...or...
With the Adaptive cruise control started :
–
Press the steering wheel button
▶
(6).
> Pilot Assist is started.
Pilot Assist steering assistance
is only active when the steering
wheel symbol (2) has changed
from GREY to GREEN.
Pilot Assist only regulates the
time interval to the vehicle
ahead when the distance symbol shows a vehicle
(1) above the steering wheel symbol.
At the same time a speed
range is marked.
The higher speed is the
stored/selected speed and the
lower speed is that of the vehi-
cle ahead (target vehicle).