Volvo XC90 Twin Engine 2019, Owner'S Manual

Page: 503 / 700

STARTING AND DRIVING
* Option/accessory. 501
3. Screw in the towing eye until it reaches its
end stop.
Screw the eye in firmly. For example, thread
through the wheel bolt wrench
*
and use it as
a lever.
IMPORTANT
It is important that the towing eye is firmly
screwed into place - right in until it stops.
Removing the towing eye
–
Unscrew and remove the towing eye after
use and return it to its place in the foam
block.
Finish by refitting the cover onto the bumper.
Related information
•
Towing (p. 499)
•
Recovery (p. 501)
•
Tool kit (p. 575)
Recovery
For recovery, the car is taken away with the help
of another vehicle.
Call a recovery service for recovery assistance.
The towing eye can be used to pull the car up
onto a recovery vehicle with a flatbed platform.
IMPORTANT
Note that cars with Twin Engine must always
be transported raised up with all the wheels
on the recovery vehicle's platform.
Applies to cars with level control
*
: If the car is
equipped with air suspension, this must be disa-
bled before the car is raised. Deactivating the
function via the centre display.
1. Press Settings
in the top view.
2. Press My Car Parking Brake and
Suspension .
3. Select Disable Leveling Control .
The car's position and ground clearance deter-
mine whether it is possible to pull it up onto a
flatbed platform. If the slope of the recovery vehi-
cle's ramp is too steep, or if the ground clearance
under the car is inadequate, then the car may be
damaged if you try to pull it up. The car should
then be lifted using the recovery vehicle's lifting
device.
WARNING
No one/nothing is allowed to remain behind
the recovery vehicle while the car pulled up
onto the flatbed platform.
Related information
•
Fitting and removing the towing eye (p. 500)