Volvo XC90 Twin Engine 2019, Owner'S Manual

Page: 657 / 700

MAINTENANCE AND SERVICE
}}
655
IMPORTANT
Avoid washing the car with cleaning agent
with a pH value lower than 3.5 or higher than
11.5. This may result in discolouration of ano-
dised aluminium parts such as roof rack and
around the side windows.
Never use metal polishing agent on anodised
aluminium parts, this can result in discoloura-
tion and destroy the surface treatment.
Related information
•
Cleaning the exterior (p. 650)
•
Polishing and waxing (p. 650)
•
Handwashing (p. 651)
•
Automatic car wash (p. 652)
•
High-pressure washing (p. 653)
•
Cleaning the wiper blades (p. 653)
•
Cleaning wheel rims (p. 655)
•
Rustproofing (p. 655)
Cleaning wheel rims
The car should be washed as soon as it
becomes dirty. This means that the car is easier
to clean since the dirt does not attach as firmly.
It also reduces the risk of scratches and keeps
the car fresh. Carry out cleaning in a cleaning
area with an oil separator, and use car shampoo.
Rims
Only use rim cleaning agent recommended by
Volvo.
Strong rim cleaning agents can damage the sur-
face and cause stains on chrome-plated alumi-
nium rims.
Related information
•
Cleaning the exterior (p. 650)
•
Polishing and waxing (p. 650)
•
Handwashing (p. 651)
•
Automatic car wash (p. 652)
•
High-pressure washing (p. 653)
•
Cleaning exterior plastic, rubber and trim
components (p. 654)
•
Cleaning wheel rims (p. 655)
•
Rustproofing (p. 655)
Rustproofing
The car has effective protection against corro-
sion.
Anti-corrosion protection for the body consists of
metallic protective coatings on the sheet metal, a
high-quality painting process, corrosion-protected
and minimised metal overlap, and shielding plas-
tic components, abrasion protection and supple-
mental rust inhibitor on exposed areas. In the
chassis, exposed components of the wheel sus-
pension are made of corrosion-resistant cast alu-
minium.
Inspection and maintenance
The car's anti-corrosion protection normally
requires no maintenance but a good way to fur-
ther reduce the risk of corrosion is to keep the
car clean. Strong alkaline or acidic cleaning solu-
tions must always be avoided on glossy trim com-
ponents. Any stone chips should be rectified as
soon as they are discovered.
Related information
•
Cleaning the exterior (p. 650)
•
Polishing and waxing (p. 650)
•
Handwashing (p. 651)
•
Automatic car wash (p. 652)
•
High-pressure washing (p. 653)
•
Cleaning the wiper blades (p. 653)