Group 30 Electrical System—VNL, VNM
Service Procedures
3646-03-02-30
Sleeper Reading Lamp Switch
Replacement
(Includes checking switch function)
For service procedure, see “Sleeper Control Panel Switch
Replacement” page 86.
3646-03-02-31
Sleeper Heater Control Switch
Replacement
(Includes checking switch function)
For service procedure, see “Sleeper Control Panel Switch
Replacement” page 86.
Sleeper Control Panel Switch
Replacement
Removal
1
Make certain the vehicle ignition is
OFF before beginning this procedure.
2
W8000922
Remove the 2 torx bolts from the con-
trol panel. Pull the panel out and
forward to clear the 3 plastic tabs on
the rear of the panel’s left side.
3
W3000699
Disconnect the switch electrical
connector. Using a small flat tip screw-
driver, release the locking tabs at the
top and bottom of the switch to re-
move it from the panel.
86