Group 30 Electrical System—VNL, VNM
Service Procedures
3646-03-02-02
Power Window Switch Re-
placement (Right or Left)
(Includes checking switch function)
Removal
1
W3000806
Switches on Driver’s Side Door
1) Location for Driver’s Side Window Switch
(shown not installed)
2) Driver Side Mirror Switch
3) Passenger Side Mirror Switch
4) Passenger Side Window Switch
Insert a No. 1 screwdriver into the cor-
ner of the switch panel to remove it
from the door panel.
2
W3000805
1) Mirror Switch Connector
2) Window Switch Connector
Disconnect all the window switches in-
stalled in the panel. Mark the wire
connectors to keep the arrangement
correct.
3
W3000802
Insert the mirror/window switch re-
moval tool between the housing clip
and the window switch. When the tool
is inserted, push on the switch to clear
the switch tabs from the clips. Repeat
on the opposite end and push the
switch out.
Installation
1
The tabs are different sizes on each
end, so make certain the switch is
aligned the correct way and push the
switch into the housing.
2
W3000804
Switches on driver’s side door
1) Location for Driver’s Side Window Switch
(shown not installed)
2) Driver Side Mirror Switch
3) Passenger Side Mirror Switch
4) Passenger Side Window Switch
Make certain the replaced switch is
locked into the panel. Connect the
switch connectors and install the as-
sembly into the door panel.
82
