Volvo L20B, Owner'S Manual

Page: 61 / 110

Maintenance
Maintenance instructions 59
In extremely inflammable working environments, such as saw
mills, on sanitary landfill sites and similar the machine must be in
a particularly clean condition. In such kind of working environ-
ments suitable equipment against the formation of deposits and
self-ignition should be installed (e.g. exhaust silencer guard,
cyclone filter etc.).
Check hoses and pipes for fuel, hydraulic oil and brake fluid at reg-
ular intervals for leaks and visible external damage, replace if
necessary.
Electric wires must be protected against wear and checked for
possible damage, replace if necessary. Unprotected electric wires
must not be routed in contact with oil or fuel lines.
It is of particularly importance to keep the area around the battery
and the electrical equipment free of oil and grease. Make sure that
battery poles are protected by insulating caps and that the
insulation of electric cables is intact.