D2302195
Drill out the connection (3) in the fuel tank unit (4). Use a 4 mm
(5/32”) diameter drill bit.
Note!
Use a compressed air power drill with a greased bit.
14A
R2501320
14B
R2501321
Illustration A displays the front mounting
Illustration B displays the rear mounting
Remove the four screws (1) in the front and rear mountings so
that the fuel tank lowers slightly. This allows the suction pipe for
the fuel tank to be installed.
15
Insert the pipe (1) (from the kit) into the connection (2). Press the
pipe down until it is in contact with the connection
Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
© Volvo Car Corporation
Fuel driven heater 912-D- 8698855 - V1.0
Side 9 / 24