21
D2302959
Remove the brake pipe (1) from the clamp
Take the fuel pump (FP) and bracket. Position the bracket on top
of the bracket for the fuel tank mounting, opposite the small holes
for the rivets
Take two metal rivets (2) from the kit. Rivet the fuel pump (FP)
bracket at the bracket for the fuel tank mounting.
22
D2302960
Take the double clamp from the kit. Secure the two fuel lines
from the fuel pump (FP) to each other, opposite the two blue
markings on the fuel lines
Press the brake pipe back into the clamp
Tighten the four screws securing the fuel tank. Tighten the
screws. Tighten to 24 Nm (18 lbf.ft)
Connect the connector (1) from the pre-routed power cable to
the fuel pump (FP)
Connect the quick-release connector (2) on the pre-routed fuel
line to the fuel pump (FP).
23
Secure the fuel line in the brake pipe at point (1) using a double
clamp from the kit.
Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
© Volvo Car Corporation
Fuel driven heater 912-D- 8698855 - V1.0
Side 12 / 24