R2303068
39A
R2303069
39B
R2303070
Illustration A
Take a tie strap from the kit. Clamp the protective tube at the fuel
pipe so that it is securely installed.
Illustration B
Take a hose clamp from the kit. Thread the hose clamp onto the
fuel line up to the fuel pump (FP) that was routed previously
Connect the fuel line to the short fuel pipe. Slide the pipe into the
fuel line. Slide the pipe in so far that the two pipes are in contact
with each other. This prevents air pockets from forming
Ensure that the fuel line is routed correctly and does not obstruct
the plastic hose or rub against the sub-frame or other
components
Squeeze the hose clamp together.
Note!
The fuel lines and fuel pipes must be at least 15 mm (19/32”)
from the brake pipe.
40
Take a tie strap from the kit and clamp the fuel pipe at the plastic
hose.
Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
© Volvo Car Corporation
Fuel driven heater 912-D- 8698855 - V1.0
Side 19 / 24