M2000351
29
R2303064
Pull off and push the pipe elbow to one side so that the fuel pipe
can be positioned.
30
R2303065
Remove the power steering pipes and the plastic hose from their
clips to make installing the fuel pipe easier. In order to push the
upper power steering pipe to one side, the rubber coated clamp
on the upper side of the front edge of the sub-frame may need to
be removed.
31A
Install the fuel pipe using the four pre-installed clips (1) (from the
kit) on the sub-frame. Insert the fuel pipe between the
disconnected pipes and the sub-frame. Press the fuel pipe into
place using the clips in the front edge of the sub-frame and in the
bottom in the clips (2) that secured the plastic hose. On older car
models, there are two free clips for the fuel line below the
existing pipes on the inside on the sub-frame. Due to limited
space, the fuel pipe needs to be worked slightly in order to
position it.
Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
© Volvo Car Corporation
Fuel driven heater 912-D- 8698855 - V1.0
Side 15 / 24