M2302970
Take the fuel line with the power cable from the kit. Apply tape
on the end on the section of the fuel line which is to be inserted
through the hole in the floor. (The one with a short free cable
end.)
Insert the whole cable assembly (3) between the floor and the
fuel tank out to the right.
16
M2302961
Press the quick-release connector (1) onto the connection until a
click is heard. Check that the quick-release connector is secure
Connect the power cable, routed with the fuel line to the
connector (2) in the connector bridge (3).
17
Position the wiring in the rubber grommet in the cover. Reinstall
the cover. Tighten the cover using the four nuts.
Applies to cars with Isofix mountings
Reinstall the Isofix mounting and seat belt buckle
Tighten the screw. Tighten to 40 Nm (30 lbf.ft.).Tighten the nut.
Tighten to 30 Nm (22 lbf.ft.).
Applies to all models
Reinstall the backrests, side cushions and seat cushions
Open the cover for the radiator expansion tank.
18
Route the fuel hose with the cable harness (1) at the rear edge
of the fuel tank. Route along the right-hand side of the fuel tank
Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
© Volvo Car Corporation
Fuel driven heater 912-D- 8698855 - V1.0
Side 10 / 24