M2102177
Remove the heater hose. It will not be reused.
47A
M2102178
47B
R4303090
47C
Illustration A
Insert the heater hoses (from the kit) down into the front edge of
the gearbox. Continue out to the front edge of the left-hand
wheel arch. On cars with automatic gearboxes, route both
heater hoses between the two oil hoses from the automatic
gearbox
Connect the shorter of the heater hoses to the radiator pipe (1)
at the left-hand side of the front edge of the cylinder head.
Tighten using a new hose clamp from the kit
Route the longer of the heater hoses under the intake manifold to
the turbocharger (TC) following the same route as the old heater
hose. Connect the hose in position where the old hose was
removed.
Illustration B
Applies to cars with automatic gearboxes
Take the bracket for hoses and the nut from the kit. tighten the
bracket for hoses (1) on the stud (2) on the right-hand side of
the gear selector.
Illustration C
Applies to cars with automatic gearboxes
Position the hoses in the bracket for hoses (1).
Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
© Volvo Car Corporation
Fuel driven heater 912-D- 8698855 - V1.0
Side 22 / 24