Technical Data:
TD/TAD520, TAD530/531/532
52
Group 20
Theoretical thickness for a new shim.
Computation for determining the theoretical shim thickness (T
s
) :
T
s
= L - [ ( FB
actual
- FB
nom
) x Vh
corr.factor
+ Vh
nom
+ L
o
+ A/100 ] (mm)
The correction factor Vh
corr.factor
is taken from the table on previous page.
The individual steps:
·
1st step: E
1
= FB
actual
- FB
nom
(°C/A)
·
2nd step: E
2
= E
1
x Vh
corr.factor
(mm/°C/A)
·
3rd step: E
3
= E
2
+ Vh
nom
·
4th step: E
4
= E
3
+ Lo
·
5th step: E
5
= E
4
+ A/100 (mm)
·
6th step: Ts = L – E
5
·
7th step: The actual shim thickness (S
s
) is determined with the help of table 2 below.
Theor. thickness (T
S
)
Shim thickness (S
S
)
Theor. thickness (T
S
)
Shim thickness (S
S
)
Table 2 (Shim thickness)
All measurements are in mm (1 mm = 0.0394")
NOTE!
Shims (S
s
) are only available in a calibrated thickness, with a variation of steps in 1/10 mm.
When the theoretical shim thickness (T
s
) are in the 1/100 range, use table 2 to convert it into the correct shim
thickness (S
s
).
Important!
Use only one shim at the time.
Summary of Contents for TAD420VE
Page 2: ......
Page 92: ...7742012 English 06 2007 ...
