• USB cable
• 2x AA batteries
• Carrying case
• Software CD
• Operating instructions
1
Up-to-date operating instructions
Download the up-to-date operating instructions at www.conrad.com/down-
loads or scan the QR code shown. Follow the instructions on the website.
5. Features and functions
• Single/continuous measurement methods
• Maximum/minimum/average measurement
• Quick test mode
• Measurable carrier materials – ferrous and non-ferrous metals
• Magnetic induction and eddy current sensor
• 5.08 cm TFT LC display with 320 x 240 pixels
• Brightness adjustment for LC display
• Automatic screen rotation can be switched on/off (when screen rotation is active, the display
retains the alignment for better reading of the LC display, even if the measuring device is in
different positions)
• Two selectable units
• Switchable acoustic alarm function
• LED alarm function
• Highly precise non-destructive measurement
• Teach-in measurement function for industrial applications (with single point and average
function)
• Automatic detection of carrier materials made from ferrous/non-ferrous metals
• LED display in three colours (green: good; red: below the limit; yellow: above the limit)
• USB transfer software for exporting and displaying data, curve diagrams, online measured
values in real time, printouts, etc.)
31
