Check camshaft drive belt tension again. Tensioning roller must return to its original position (notch -
1- and indicator -2- align again). See
Fig. 30
. To complete installation, reverse removal procedure.
Tighten all fasteners to specification. See
TORQUE SPECIFICATIONS
.
CAMSHAFT OIL SEAL
Removal
1. Remove upper timing belt cover. Place crankshaft at TDC with No. 1 cylinder on compression stroke.
Remove timing belt from camshaft sprocket. Remove camshaft sprocket bolt. On Beetle, use Counter
Support (3415), to hold camshaft sprocket. On all models except Beetle, use Camshaft Holder (3036)
to hold camshaft sprocket. Remove camshaft sprocket. Remove Woodruff key.
2. Install camshaft sprocket bolt and washer until washer is tight against camshaft. Rotate inner part of
Oil Seal Extractor (2085) outward 2 turns and tighten set screw. See
Fig. 31
. Lubricate threaded area
of extractor and push in as far as possible. Loosen set screw and turn inner part of extractor until oil
seal is removed.
Fig. 31: Removing Camshaft Oil Seal
Courtesy of VOLKSWAGEN UNITED STATES, INC.
CAUTION:
DO NOT turn crankshaft or camshaft with timing belt removed. Valve damage
may result.
1995 Volkswagen Golf III GL
2.0L 4-CYL
1
января
2005
г
. 1:19:01
Page 40 © 2004 Mitchell Repair Information Company, LLC.
