Support engine/transmission assembly with suitable jack.
7. Remove engine mount-to-engine bolts. Remove transmission mount-to-transmission bolts. Carefully
lower engine/transmission assembly. Ensure power steering hoses clear transmission. Separate
transmission from engine.
Installation (Except Beetle)
1. To install, reverse removal procedure. Engine alignment adjustment is necessary whenever engine is
removed or mounts are loosened. To adjust, loosen through-bolt on engine mount. Loosen transaxle
mount bolts. Loosen front engine mount and bracket.
2. Lightly rock engine and transaxle to allow position to shift as necessary. Evenly tighten mount bolts
in reverse order of loosening. Fill fluids to proper level. Adjust clutch pedal (if equipped). Tighten all
bolts and nuts to specification. See
TORQUE SPECIFICATIONS
.
Installation (Beetle)
1. To install, reverse removal procedure. Ensure engine/transmission assembly are aligned.
Engine/transmission are aligned when there is .39" (10.0 mm) distance between top engine mount and
engine mount bracket. See
Fig. 7
.
2. On A/T models, use NEW lock washer on shift cable. On all models, adjust all cables as necessary.
Fill fluids to proper level. Tighten all fasteners to specification. See
TORQUE SPECIFICATIONS
.
1995 Volkswagen Golf III GL
2.0L 4-CYL
1
января
2005
г
. 1:18:59
Page 10 © 2004 Mitchell Repair Information Company, LLC.
