11
Next remove the screws in each corner and the one holding down the access panel,
Next undo the nut connecting the burner to the isolation valve and tray will now lift free of the firebox.
Before installing the fire, check the flue for correct operation using a smoke pellet, all of the smoke
should be drawn up the flue and exit correctly from the terminal. If problems are found
DO NOT
fit the
fire until corrective measures have been completed.
At this point if required you can make some changes to the firebox to accept a flue liner.
First you must remove the flue restrictor plate at the back of the fire, and replace with the flue closure
plate supplied.
Section 7.1: PREPARING THE OPENING
Section 7.2: ADAPTING THE BOX FOR FLUE LINER