VMAC
–
Vehicle Mounted Air Compressors
Toll Free:
1-888-241-2289
Fax: 1-250-740-3201
9
Figure 3.2
□
Attach short elbow from OEM hose to the radiator and front
spigot of cooler. Attach long section from OEM hose to engine
and rear spigot of cooler (Figure 3.2).
□
Install supplied bolt through cooler with washer and nut on
bottom side of the body lift tab. Secure hoses with supplied hose
clamps and tighten bolt to specifications.
□
Connect the supplied 3/4 inch heater hose to the fitting on the oil
cooler, route it up the passenger side of the engine and connect
it to the 3/4 inch hose barb in the cylinder head. Make sure that
it does not contact any sharp surfaces or interfere with any belts
or moving components by securing with nylon ties and supplied
hose clamps.
