VMAC
–
Vehicle Mounted Air Compressors
Toll Free:
1-888-241-2289
Fax: 1-250-740-3201
15
□
Connect the 1/2 inch oil fill hose with the straight ends to the
fitting on the bottom of the inlet control valve and route it up
behind the passenger side battery box.
□
Connect the straight end of the longest 1/2 inch hose (with the
90 degree fitting) to the matching fitting (furthest from frame) on
the tank. Route the hose along the passenger side frame rail and
attach the 90 degree fitting to the passenger side fitting on the
top of the cooler.
□
Connect the shortest 1/2 inch oil hose to the matching fitting on
the compressor and the fitting on the top of the cooler. If needed,
loosen the locknut on the fitting and rotate it to attach the hose.
Tighten the locknut and make sure the hose clears all objects.
□
Insert the 1/4 and 3/16 tubes into the fittings on the back of the
tank and cover them with high temperature loom. Route them to
clear any moving or high temperature components and connect
them to the matching fittings on the inlet control valve.
□
Drill a hole in the battery box just above the battery to secure the
oil fill hose and fitting (Figure 3.9).
□
Attach the hose to the supplied oil fill fitting and secure it to the
back of the passenger side battery box with the supplied P-clip.
Drill a hole
above the top
of the battery
Oil fill fitting
Figure 3.9
