VMAC
–
Vehicle Mounted Air Compressors
Toll Free:
1-888-241-2289
Fax: 1-250-740-3201
4
Part 1: Preparing for Installation
Preparation for installation is very important. Missing an item can
cause problems in the installation or even damage to components.
Check off each item as it is completed so that you do not miss any
preparation steps.
1.1 Preparing for Installation
□
Disconnect the battery terminals.
□
Remove the air cleaner assembly and the passenger side
intercooler tube.
□
Drain the coolant and remove the lower radiator hose (save for
use later).
□
Disconnect the fan clutch wire and remove it from the mounting
clips
□
Remove the fan and the fan shroud from the engine locating
brackets.
□
Loosen the OEM crank pulley bolts but do not remove them.
Now release the OEM belt from the OEM tensioner. Remove the
OEM belt.
□
Remove the OEM crank pulley and scrape off the clear coat from
the inside front face of the hub. Discard the locking plate.
□
Remove the lower fan shroud bracket and cut away the section
shown in Figure 1.1.
