background image

Operating Instructions

Rotary Screw 
Air Compressors

IN564600AV 10/12

© 2012 Campbell Hausfeld/Scott Fetzer

 For parts, product & service information

visit 

www.campbellhausfeld.com

1-855-504-5678

Series CS Rotary Screw Compressors

Table of Contents

Safety Guidelines . . . . . . . . . . . . . . . . . . . . . 2

Safety Symbols . . . . . . . . . . . . . . . . . . . . . . . 2

Important Safety Information  . . . . . . . . . 2

Specifications . . . . . . . . . . . . . . . . . . . . . . . . 2

Getting To Know Your Compressor  . . . . 4

Unpacking. . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Installation  . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Wiring Diagram  . . . . . . . . . . . . . . . . . . . . . . 9

Operation  . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Maintenance. . . . . . . . . . . . . . . . . . . . . . . . 14

Troubleshooting Guide  . . . . . . . . . . . . . . 18

Limited Warranty. . . . . . . . . . . . . . . . . . . . 20

Quick Reference

OIL

Single viscosity ISO100 rotary screw compressor oil 
(Part number GS903800AV - 1 Gallon Container). 
Available from Campbell Hausfeld, please call 1-855-504-5678 for customer 
assistance.

OIL CAPACITY

2.1 gallons

RETAIN THIS INFORMATION FOR FUTURE REFERENCE

Serial Number: 

Model Number: 

Date of Purchase: 

Summary of Contents for CS2152









































Reviews: