VKI Technologies KEURIG Eccellenza touch Operation Manual Download Page 93

Page: 93 / 108

ecti

on 3

- P

rog

rammin

Eccellenza Touch

VKI Publication #100308-003

The testing options now appear on the right section of the screen. In this example, the only

option available is to activate the grinder for 3 seconds.

Tap the “Activate” button and the grinder (only) will energize for 3 seconds.

It is extremely important to note that when testing the coffee motors (M6 or

M7), ONLY the coffee motor will activate. Coffee beans will be dispensed into

the grinder but the grinder, or any other component, will NOT activate.

When testing the Waste Bin Presence (D2) or Waste Bin Full (L9) sensors, a

voltage level and the bin’s status (present or absent) are displayed on the

screen.

Summary of Contents for KEURIG Eccellenza touch













































































































Search results

Summary of Contents for KEURIG Eccellenza touch

Reviews:

Related manuals for KEURIG Eccellenza touch

Brands by name

Popular brands

VKI Technologies KEURIG Eccellenza touch, Operation Manual

Search results

Summary of Contents for KEURIG Eccellenza touch

Reviews:

Related manuals for KEURIG Eccellenza touch

Brands by name

Popular brands