VKI Technologies KEURIG Eccellenza touch Operation Manual Download Page 106

Page: 106 / 108

ecti

on 6

- U

ating Fi

rmw

are

Operation Manual

VKI Publication #100308-003

106

The updating process is automated and requires no user input. The screen reverts to

command-style prompts that provide progress information on the update.

Once the update is complete (it may take up to 30 minutes), you are prompted to

remove the USB flash drive to reboot the machine.
Remove the flash drive and the Eccellenza Touch will reboot itself twice. While it is

rebooting, re-install the plug onto the USB connector and re-install the waste bin.

If the screen remains black with a “log-in” prompt, allow the machine sit

undisturbed for 15 minutes or so as the upgrade may still be in progress in

the background.

It is possible that an error may be displayed on the screen after the reboot. If this is the

case, simply clear the error.

If the update process was interrupted prior to completion, you must connect

the USB flash drive to a computer, and delete the "Backup" folder that was

created, otherwise further updates will not be possible with this flash drive.

Updating the Eccellenza Touch firmware will not overwrite or change any

existing settings or customizations you may have made in the programming.

These settings will be maintained.

Summary of Contents for KEURIG Eccellenza touch













































































































Search results

Summary of Contents for KEURIG Eccellenza touch

Reviews:

Related manuals for KEURIG Eccellenza touch

Brands by name

Popular brands

VKI Technologies KEURIG Eccellenza touch, Operation Manual

Search results

Summary of Contents for KEURIG Eccellenza touch

Reviews:

Related manuals for KEURIG Eccellenza touch

Brands by name

Popular brands