VKI Technologies KEURIG Eccellenza touch Operation Manual Download Page 32

Page: 32 / 108

ecti

on 3

- P

rog

rammin

Operation Manual

VKI Publication #100308-003

Ingredients Tab

The 'Ingredients' tab displays the consumption (in weight) for each of the ingredients used (as

well as the volume of water used) to prepare the beverages the equipment dispenses.

Emailing Data or Saving it to a USB Flash Drive

All of the data available in the Eccellenza Touch's Dashboard can either be saved to a USB flash

drive, or sent to an email address as an attachment (if an email address has been set in the

"Network" menu). Whether saved to a USB drive or sent by email, the attachment is in

Microsoft Excel format.
To save the data to a USB drive, tap on the USB drive icon on the left. To send it by email, tap on

the email icon (envelope) on the right, and follow the prompts on the screen.

Email Icon

USB Drive Icon

Summary of Contents for KEURIG Eccellenza touch













































































































Search results

Summary of Contents for KEURIG Eccellenza touch

Reviews:

Related manuals for KEURIG Eccellenza touch

Brands by name

Popular brands

VKI Technologies KEURIG Eccellenza touch, Operation Manual

Search results

Summary of Contents for KEURIG Eccellenza touch

Reviews:

Related manuals for KEURIG Eccellenza touch

Brands by name

Popular brands