VKI Technologies KEURIG Eccellenza touch Operation Manual Download Page 88

Page: 88 / 108

ecti

on 3

- P

rog

rammin

Operation Manual

VKI Publication #100308-003

A checkmark appears beside the PIN if it was entered correctly. If you need to change

the Operator PIN, tap 'New PIN', and follow the prompts.

In the screenshot above, in the 'Administrator Privileges' section you'll notice that

almost all of the options are green. These are the current options available to the

Administrator.

To change these options, tap on the options that you want to make available to the

Administrator (they will change color to green). To remove the availability of any

options, tap them so that they are grayed out.

In the screenshot above, in the 'Administrator Privileges' section you'll now notice that

the 'Dashboard', 'General', 'Power Settings' and 'Maintenance' options are green.

These are the updated options available to the Administrator. The grayed-out options

will not be visible to the Administrator.

Summary of Contents for KEURIG Eccellenza touch













































































































Search results

Summary of Contents for KEURIG Eccellenza touch

Reviews:

Related manuals for KEURIG Eccellenza touch

Brands by name

Popular brands

VKI Technologies KEURIG Eccellenza touch, Operation Manual

Search results

Summary of Contents for KEURIG Eccellenza touch

Reviews:

Related manuals for KEURIG Eccellenza touch

Brands by name

Popular brands