VKI Technologies KEURIG Eccellenza touch Operation Manual Download Page 38

Page: 38 / 108

ecti

on 3

- P

rog

rammin

Operation Manual

VKI Publication #100308-003

General Settings

The 'General' screen is where you can configure the waste chute system, the primary and

secondary interface languages to be used, units of measure (Metric or U.S. Standard) and the

date and time, as well as the display and sound settings. You can also change the frequency at

which the brewer and powder rinse cycles are triggered in the “Task Schedule” tab.

Installation

Waste Management (Waste Chute)

If the machine will be equipped with the optional waste chute kit, you'll need to come to this

tab and enable the 'Use Waste Chute' option. Doing so will make the wiper move from right

to left, guiding the spent coffee grounds into the waste chute instead of the waste bin.

Regional

Language

The Eccellenza Touch comes pre-loaded with three different languages (English, French and

Spanish), however only two can be active at one time. In this tab, you can define the Primary

Language, which will be the default, and the Secondary Language, which will be selectable by

the user.

Summary of Contents for KEURIG Eccellenza touch













































































































Search results

Summary of Contents for KEURIG Eccellenza touch

Reviews:

Related manuals for KEURIG Eccellenza touch

Brands by name

Popular brands

VKI Technologies KEURIG Eccellenza touch, Operation Manual

Search results

Summary of Contents for KEURIG Eccellenza touch

Reviews:

Related manuals for KEURIG Eccellenza touch

Brands by name

Popular brands