3
VKB Gunfighter Mk.II Quick
Guide – The Basics
IMPORTANT:
You’ll need to
calibrate
your new Gunfighter. Correct calibration is essential especially when your Gunfighter is
bundled with an MCG or Kosmosima grip due to the additional axes these grips provide (see pg. 11-12).
NOTE
: VKB shipped your Gunfighter with tightened axis dampers; therefore, you will need to
adjust/loosen
these
dampers for both pitch and roll axes accordingly, otherwise you might find that your Gunfighter does not perfectly
return to center by spring force alone (see pg. 5-6).
NOTE
: Gunfighters ship with cams #10 (soft center detent for both axes), and springs #20 (standard strength)
factory installed (see pg. 6-7 if you wish to change those).
NOTE
: Optionally, if you wish to
flash
your Gunfighter with new firmware in order to install a new or different grip,
or update to the latest firmware for your current Gunfighter, start reading from pg. 9.
