12
VKB Gunfighter Mk.II Quick
Guide - SOFTWARE
If you have a new Gunfighter (or after resetting it) you need to
Calibrate
it:
Note
: Don’t use the native Windows calibration utility! Use VKBDevCfg as you have up to this point
already.
1. Flip the foldable trigger to the “up” position (MCG PRO only), and then squeeze the trigger fully,
and then let go of it to determine its middle position (MCG PRO only).
2. Launch VKBdevCfg-C.
3. In the top panel, click on the "VKBsim Gunfighter Modern Combat" name to select it.
4. From the Tools tab, click the ‘Start Calibr’ button; the SYS LED on the Blackbox starts blinking
(switch to the Test > Axes1 tab to observe your calibration action).
5. Move the stick through its full range (pitch and roll axes).
6. Move the MASTER MODE (РЕЖИМ КБО) ministick through its full range (MCG grip)
7. Move the GATE CONT (УПРАВ СТРОБ) ministick through its full range.
8. MCG - Squeeze the BRAKE lever fully and let go of it.
9. MCG - Move the foldable trigger to the “up” position, squeeze it, and then let go of it – this
moves it through its full range (MCG PRO only).
(continued on the next page)
