6
VKB Gunfighter Mk.II Quick
Guide - HARDWARE
Gunfighter clutch damper adjustment:
(Refer to pg. 5, Step 1-3 on how to remove the dust cover)
1. Using the provided hex key, rotate the vertical nuts (see image)
to adjust the damper force per axis*
(left = more loose, right = more tight)
2. Install the grip, check the operation and 'feel' of the gimbal.
3. If necessary, re-adjust the damper to your liking.
4. Reattach the dust cover and grip when done.
If needed, you might have to loosen additional screws (see image below),
one per axis; these screws could be a
little too tight by factory default to fully
loosen the dampers using Step 1
above. See pg. 5, Step 4-7 on how to
access the gimbal to achieve this.
* Do not exceed the tightening force of the damper (excessive force damage is not covered under warranty)!
