14
O
UTPUT
T
AB
If you open the
Configure Channel
pane for an output, instead, you will find settings related to output from
the channel to SMPTE 2110.
FIGURE 14
The first choice you will usually make is which audio/video source you wish to output as SMTPE 2110. Often,
you will simply use the
Audio/Video Source
menu to select an NDI a/v stream from your network, but there
are other possibilities, too. Selecting a
Video Format
at right determines the video output format applied.
C
LIPS AND
IP
S
OURCES
FIGURE 15
