VIVOTEK–Built with Reliability
8–User's Manual
Safety
This product is connected to a fuse box in the passenger compartment before it is connected
to the vehicle battery, and the fuse in a fuse box is UL listed as an automotive fuse.
Use the appropriate flexible and SAE wiring to connect to a fuse box.
This product is installed in the passenger compartment.
This product must be installed and maintained by qualified service personnel.
Never open the housing of the power supply unit.
Install and operate the system only in a dry, weather-proof location.
Observe the following safety factors:
•
Is there visible damage to the system or power cord
•
Is the system operating correctly.
•
Has the system been exposed to rain or moisture
•
Has the system been in a long storage under harsh conditions or exposed to
unconforming
stress.
The relevant electrical engineering regulations must be complied with at all times during
installation.
Ensure that all maintenance and repair work is handled by qualified personnel such as
electrical engineers or network specialists.
Read this manual before installing or operating the system. The documentation contains
important safety instructions about permitted uses.
The rated DC input is:
10~48V, maximum 15A
@ input 10V; the PoE output:
802.3af or
802.3at,
up to
30W
per channel,
total budget is
64W
.
If a fault occurs, disconnect the power cord from the power supply.
Do not install the system close to heaters or other heat sources. Avoid locations with direct
sunlight.
Use only the cables shipped with system or use appropriate cables that can withstand electro
-
magnetic interference.
セキュリティ基準(新規則第 34 条の 10)
「本製品は 電気通信事業者(移動通信会社、固定通信会社、インターネットプロバイダ等)
の通信回線(公衆無線 LAN を含む )
に直接接続することができません。本製品をインターネットに接続する場合は、必ずルータ等
を経由し接続してください。」