VIVOTEK–Built with Reliability
User's Manual–33
Initial Configuration–via a Local Console
5
Follow the onscreen messages to complete the initial configuration:
1. The NVR is started when the vehicle engine is started. When started for the first time, you
will be required to configure a system password. Jot down the password, and enter it twice to
access the system.
A local console requires the following:
1. A monitor is connected via an HDMI or VGA cable.
2. A mouse and/or a keyboard are connected to the system.
3. It is presumed that the system has not been configured yet.
2. Select the UI language, Time zone, and current date and time. Click on the Continue button
to proceed.
