Vivotek ND8301 User Manual Download Page 98

Page: 98 / 212

VIVOTEK

98 - User's Manual

2. Fill in the precise Start Time and End Time:

a. Directly enter the value in the Start Time and End Time fields, then click

Add

b. The corresponding red timeline bar will automatically appear as shown below.

Delete time segments: Choose either step 1 or step 2 to set up

1. Use the mouse to erase the timeline bar:

Right-click

on an existing red timeline bar and drag the

mouse. A green timeline bar representing the deleted part of the time segment will erase the red bar as

shown below.

In the following illustration, the green arrows show the dragging direction of the mouse. You can drag it

from left to right or the opposite.

2. Use the delete button to remove the entire timeline bar:

a. Click an existing red timeline bar or

left-click

the

daily timeline control bar

(the purple rectangles)

and drag the mouse.

b. The corresponding time segment will appear in the Start Time and End Time fields.
c. Click

Delete

, and the selected timeline bar will disappear.

Summary of Contents for ND8301





















































































































































































































Search results

Summary of Contents for ND8301

Reviews:

Vivotek ND8301, User Manual, Page: 98 / 212

Search results

Summary of Contents for ND8301

Reviews: