Vivotek ND8301 User Manual Download

Page: 15 / 212

VIVOTEK

User's Manual - 15

Network Deployment

1. Connect the supplied power adapter to a power outlet.

Connect network cameras to the NVR’s LAN ports.

3. If you want to access NVR over the Internet, connect the NVR to the Internet via the WAN

port. A web console can be established from a remote PC by keying

http://<public IP>:3454

a browser’s URL address field. However, port forwarding on the router for the TCP port will be

necessary.

4. Push the power button to run the NVR.

Router

Internet

Router

Default Fixed IP:

192.168.1.10

LAN

WAN

Switch

Wireless AP / Router

Clients

The LAN and WAN ports can be configured into the same or different subnets.

You may also connect cameras through the WAN port. If you have cameras connected via the

WAN port, make sure the WAN port and the cameras connected through it acquire static IP

addresses even when the WAN port is connected to router or AP. If not, the cameras detected

through the WAN port will use the default IPs, e.g., 169.254.xx.xx, and the LiveClient software

will not be able to detect their presence.

NOTE:

Default: DHCP

Summary of Contents for ND8301





















































































































































































































Search results

Summary of Contents for ND8301

Reviews:

Related manuals for ND8301

Brands by name

Popular brands

Vivotek ND8301, User Manual

Search results

Summary of Contents for ND8301

Reviews:

Related manuals for ND8301

Brands by name

Popular brands