Vivotek ND8301 User Manual Download Page 108

Page: 108 / 212

VIVOTEK

108 - User's Manual

How to Edit Scheduled Backup Settings

VAST LiveClient supports scheduled backup which allows the user to back up the recorded data

in another disk.

Please follow the steps below to enable scheduled backup settings:

a. Select the target station from the device tree.
b. Click

Configuration > Station Settings > Scheduled Backup Settings

on the menu bar (or

right-

click

the station and select

Station Settings > Scheduled Backup Settings

c. The

Scheduled backup settings

window will prompt.

Select Backup Source

d. Check Enable schedule backup.
e. Select the data source you want to backup. If you check

Selected cameras

, you can click

choose the data source that you want to backup.

d
e

Summary of Contents for ND8301





















































































































































































































Search results

Summary of Contents for ND8301

Reviews:

Vivotek ND8301, User Manual, Page: 108 / 212

Search results

Summary of Contents for ND8301

Reviews: