Vivotek ND8301 User Manual Download Page 167

Page: 167 / 212

VIVOTEK

User's Manual - 167

Remove Recorded Video Clips from Video Cells

There are two ways to remove a recorded video clip from the video cell:

Right-click

the video cell and select

Remove

Drag-and-drop

the live view from the video cell to the hierarchical management tree window.

If you want to remove all live videos from the video cells, please click

on the menu bar.

Timeline Slider Bar and Histogram

The red section of the histogram shows the extent of time of valid video recording during a day. The

timeline slider bar will move forward as the video is on playback. You can manually move forward/

backward along the

Timeline Slider Bar

to the desired position as shown below.

The current time of the video clip will be displayed on the status panel. It will change according to the

current position of the timeline slider bar.

Start time of the histogram

End time of the histogram

Mega Pixel Network Camera

2012/07/31PM

NOTE:

Mega Pixel Network Camera

2012/07/31PM

Summary of Contents for ND8301





















































































































































































































Search results

Summary of Contents for ND8301

Reviews:

Vivotek ND8301, User Manual, Page: 167 / 212

Search results

Summary of Contents for ND8301

Reviews: