Vivotek CC9380-HV User Manual Download

Page: 91 / 375

VIVOTEK

User's Manual - 91

Manual setup

DDNS: Dynamic domain name service

Enable DDNS: Select this option to enable the DDNS setting.

Provider: Select a DDNS provider from the provider drop-down list.

VIVOTEK offers

Safe100.net

, a free dynamic domain name service, to VIVOTEK customers. It

is recommended that you register

Safe100.net

to access VIVOTEK’s Network Cameras from the

Internet. Additionally, we offer other DDNS providers, such as Dyndns.org(Dynamic), Dyndns.

org(Custom), TZO.com, DHS.org, CustomSafe100, dyn-interfree.it.

Note that before utilizing this function, please apply for a dynamic domain account first.

■

Safe100.net

1. In the DDNS column, select

Safe100.net

from the drop-down list. Click

I accept

after reviewing

the terms of the Service Agreement.

2. In the Register column, fill in the Host name (xxxx.safe100.net), Email, Key, and Confirm Key,

and click

Register

. After a host name has been successfully created, a success message will

be displayed in the DDNS Registration Result column.

3. Click

Copy

and all the registered information will automatically be uploaded to the corresponding

fields in the DDNS column at the top of the page as seen in the picture.

[Register] Successfully Your account information has

been mailed to registered e-mail address

Summary of Contents for CC9380-HV
























































































































































































































































































































































































Search results

Summary of Contents for CC9380-HV

Reviews:

Related manuals for CC9380-HV

Brands by name

Popular brands

Vivotek CC9380-HV, User Manual

Search results

Summary of Contents for CC9380-HV

Reviews:

Related manuals for CC9380-HV

Brands by name

Popular brands