VIVOTEK
User's Manual - 203
7.10 IR cut control
Group:
ircutcontrol
(capability.nvideoinprofile> 0 and capability_daynight_c<0~(n-1)>_support > 0)
n denotes the value of "capability_nvideoin"
NAME
VALUE
SECURITY
(get/set)
DESCRIPTION
mode auto,
day,
night,
di,
schedule
<product
dependent>
6/6
Set IR cut control mode
sir
<product dependent>
<boolean>
6/6
Enable/disable Smart IR
* Only available when
"capability_daynight_c<0~"capability_nvide
oin"-1>_smartir" is 1
daymodebegintime
00:00~23:59
6/6
Day mode begin time
daymodeendtime
00:00~23:59
6/6
Day mod end time
disableirled
<boolean>
6/6
Enable/disable built-in IR led
(capability_daynight_c<0~"capability_nvide
oin"-1>_buildinir > 0)
enableextled
<boolean>
1/6
Enable/disable external IR led
(capability_daynight_c<0~"capability_nvide
oin"-1>_externalir > 0)
extledmode
do, irring
* Available values
are listed in
"capability_daynight
_c<0~(n-1)>_extle
d_interface"
6/6
Turn on an external IR led which is mounted
do (digital output) device or is a IR ring
device.
* Only available when
"capability_daynight_c<0~"capability_nvide
oin"-1>_externalir" is 1.
* Only valid when
"ircutcontrol_enableextled" is 1.
bwmode
<boolean>
6/6
Switch to B/W in night mode if enabled.
* Only available when
"capability_daynight_c<0~(n-1)>_
blackwhitemode" is 1.
sensitivity
low, normal, high
(if
6/6
Sensitivity of day/night control.
Summary of Contents for CC9380-HV
Page 84: ...VIVOTEK 84 User s Manual ...
