Vivax cool ACP-12CC35GECI, Service Manual

Page: 54 / 190

A/A DC INVERTER U-MATCH AIR CONDITIONERS INSTALLATION
75
1.3 Installation of Cassette Type
1.3.1 Before Installation
After receiving the machine, please check for any transport damage. If finding any surface or internal damage,
please immediately report to the transport company or equipment company in writing.
After receiving the machine, please check the unit and accessories in reference to the packing list. Ensure that
the model is correct and the machine is in good condition. Please also check if the specification and quantity of
accessory parts are correct.
Determine the correct handling route and methods, thus to avoid damaging the unit or causing possible hazard.
For the sake of protection and safety, it is suggested to move the unit with the packaging box. Even though it is
not permitted to do like this under special occasions, do not remove the packaging box, thus to avoid loosening
or falling during handling.
Confirm if the installing foundation is solid. When this unit is to be installed on the metal section of the building,
make sure that the electrical insulation must comply with applicable standards.
Ensure that the place of installation is far from the area where the inflammable or explosive substances are
stored, thus to avoid possible explosion or fire due to leakage.
1.3.2 Installation Site
Obstruct should put away from the intake or outlet vent of the indoor unit so that the airflow can be blown
though all the room.
Make sure that the installation had accord with the requirement of the schematic diagram of installation spaces.
Select the place where can stand 4 times of the weight of the indoor unit and would not increase the operating