Portavant 80 automatic
12
Revision 12/2017
6
Installation and commissioning by the installer
In accordance with DIN 18650 / EN 16005, the Portavant 80 automatic system may only be
installed and commissioned by technicians (installer) trained by the drive unit manufacturer.
A separate installation and commissioning manual is included in the product packaging. The
installation and commissioning manual is available from the drive unit manufacturer, if
required (see imprint). Please specify the production date of the drive unit (see CE sticker on
drive unit).
The installer must perform a safety analysis in accordance with section 7 before installing
the Portavant 80 automatic system.
The installer is considered the manufacturer of the complete doorset and is obliged to
provide a declaration of conformity in accordance with section 7 and to attach a CE mark to
the doorset in accordance with section 8.
After installation, the installer must commission the system, including a function test, in
accordance with the installation manual and must also approve the system in accordance
with section 9. The approval must be documented in the inspection record in section 9.
Summary of Contents for Portavant 80 automatic
Page 1: ...Manual EN Gebr Willach GmbH Stein 2 53809 Ruppichteroth Germany...
Page 33: ...Portavant 80 automatic 32 Revision 12 2017 12 2 EC Declaration of Conformity...
Page 34: ...Portavant 80 automatic 33 Revision 12 2017 12 3 Type examination by T V...
