Vitris Portavant 80 automatic, Manual

Page: 10 / 38

Portavant 80 automatic 9
Revision 12/2017
All motor-assisted operating modes comply with the definition of low kinetic energy
according to DIN 18650 / EN 16005.
DANGER!
(Risk of crushing/shearing/impact)
The use of radio motion detectors that could theoretically be connected to
the radio receiver (intended for radio push button and remote control) is not
permissible . The use of radio motion detectors has been deliberately omitted
by the manufacturer in order to prevent any adverse effects on the safety
concept described above. Any mention of motion detectors in this document
always refers to the hard-wired connection of one or more motion detectors to
the dedicated terminals provided at the drive unit.
3.4 Collision with obstacles
If a door collides with an obstacle in its travel path, it stops immediately to return to its
opposite end position. Depending on the operating mode, it remains in this end position until
the next impulse is received or it commences another closing motion once the open period
has elapsed. If another collision occurs at the same position, then the door is disabled
(possibly only when it has arrived at its end position). It must then be push-started manually.
This disabling feature prevents the door from repeatedly colliding with the same obstacle.
Should the reversing door, after the initial collision, run into a second obstacle, then the door
will stop and be disabled immediately at this position.
The low kinetic energy mode of the door ensures that static forces do not exceed 67 N.