Portavant 80 automatic
20
Revision 12/2017
The standard permits the entry of several classes (in general all three if applicable) at the
position of the 7th digit, i.e. the installer may enter any applicable digit into the classification
label on the drive unit and into the classification copy in this manual (note: use permanent
marker pen).
EC Declaration of Conformity
The manufacturer of the doorset herewith declares conformity with the Directive on Machinery
Company:
_________________________________________________________
Name:
_________________________________________________________
Street:
_________________________________________________________
Post code/City:
_________________________________________________________
__________________________________________________________________________
We hereby declare that the complete sliding doorset, driven by the automatic drive
system for sliding doors of type "Portavant 80 automatic", manufactured by Gebr. Willach
GmbH, Stein 2, 53809 Ruppichteroth, Germany,
serial number / year of manufacture: __________________________
(copy from type label)
complies with the requirements of the EC Directive on Machinery (2006/42/EC).
We declare that the specific technical documents for this complete machine have been
created in accordance with Annex II, Part A.
A safety analysis (see section 7.1) was performed and documented with due consideration
of the conditions on site. Assembly and commissioning were performed in accordance
with the assembly instructions and the manual of the drive system manufacturer.
________________________ ______________________________
Place, Date
Name and signature
Installer/Installation contractor
Summary of Contents for Portavant 80 automatic
Page 1: ...Manual EN Gebr Willach GmbH Stein 2 53809 Ruppichteroth Germany...
Page 33: ...Portavant 80 automatic 32 Revision 12 2017 12 2 EC Declaration of Conformity...
Page 34: ...Portavant 80 automatic 33 Revision 12 2017 12 3 Type examination by T V...
