ENVI Series: VTD-13FN / VTD-13VN / VTD-20VN
8
4.
Place the camera in the desired location and install usingsupplied screws.
5.
With the help of a hand held monitor (VTM-LCD351 not included) you can adjust the field of
view and focus the camera.
a)
Connect the secondary video cable between the camera and the monitor BNC as shown
below.
6.
Adjusting Camera View
You can adjust the camera’s Pan / Tilt
7.
Removable Storage
For recording directly on the camera you will need to install a MicroSD card, this will allow
you to play video directly from the camera. The MicroSD card willneed to be formatted.
(refer to
Section 17.1MicroSD Configuration on page 69
for instructions on Formatting)
Note: (
Please use only class 10 MicroSD cards
)