ENVI Series: VTD-13FN / VTD-13VN / VTD-20VN
7
4.
VTD-13FN Installation
4.1.
Connections
1.
Power
Depending on the type of installations, apply power to the camera by one of the options
below.
a)
Via Ethernet – Use only with POE switch (100 Meters max distance)
b)
12VDC - Use with 12VDC 500mA
NOTE: If your camera is PoE you do not need to apply
separate power
2.
Ethernet connection
a)
Insert one end of the Ethernet cable into the network jack of your camera, and insert the
other end into the data port (sample: switch, router, etc)
3.
Remove the dome cover from the camera using a coin