ENVI Series: VTD-13FN / VTD-13VN / VTD-20VN
10
1.
Ethernet connection
b)
Insert one end of the Ethernet cable into the network jack of your camera, and insert the
other end into the data port (sample: switch, router, etc)
2.
Remove the dome cover from the camera using a coin
3.
Place the camera in the desired location and install usingsupplied screws.
4.
With the help of a hand held monitor (VTM-LCD351 not included) you can adjust the field of
view and focus the camera.
b)
Connect the secondary video cable between the camera and the monitor BNC as shown
below.