ENVI Series: VTD-13FN / VTD-13VN / VTD-20VN
31
MAC Address
MAC address of the selected device is shown.
Server Name
Name of the selected IP device.
HTTP Port
HTTP port number of the IP device for web access to homepage.
IP Type
How to assign IP address to the device (Select PPPoE in this mode)
PPPoE
User Authentication for PPPoE Connection.
•
PPPoE User: Enter User ID.
•
PPPoE Password: Enter Password for the User ID.
•
PPPoE Password Confirm: Enter the same Password again.
Authentication
(Admin Password)
Password for the IP device.
(Default password for Vitek products is “root” unless already changed)
Save Configuration
Option
Select whether the configured contents is to be saved in the Camera memory or not.
•
Save Configuration: Changed values will be saved in the Camera memory of the
device, which means the changes are permanent.
•
Not Saving: Changed values will not be saved in the Camera memory, which
means if the IP device is turned off the changes are lost and the previous setting
will be applied back.
Note: After setting up the network for the IP devices, make sure the IP devices are
accessible on the network from your computer. It can be done by running Live
View function of the homepage of the IP device’s built-in server. Refer toSection
10.9Live Viewon page35for how to do it.
