Vitek VT-8518, Manual Instruction, Page: 5 / 24

5
ENGLISH
• Remove the blender bowl (4) from the motor
unit (6).
•
Remove the lid (2) from the bowl (4) by lift-
ing the lock (3) and pulling it upwards.
• Remove the measuring cup (1) from the
lid (2), turning it counterclockwise.
• Take the processed products out of the
bowl (4). If necessary, you can use a spatula
to remove the foodstuffs.
•
After the operation is finished, wash the
blender bowl (4).
Note:
–
If food processing is hindered, you can add
some water, liquor or juice into the blender
bowl (4).
ATTENTION! Continuous operation time
of the blender should not exceed 2 minutes;
then switch the unit off and let it cool down
for 1 minute. After four operation cycles make
a break of at least 10 minutes.
CLEANING AND CARE
After the unit operation is finished, switch the
blender off by setting the operation mode
switch (7) to the “
0 ” position and unplug it,
remove the blender bowl (4) from the motor
unit (6) and remove the processed products
from the bowl (4).
•
Wash the bowl (4) preliminarily.
•
To do this install the blender bowl (4) on the
motor unit (6) (the symbol
▼
on the blender
bowl (4) should match the symbol
▲
on the
motor unit (6)). Add some soap solution into
the bowl (4). Cover the bowl (4) with the
lid (2) with installed measuring cup (1). Insert
the power plug into the mains socket. Set the
switch (7) to the position “
P ” and hold it for
several seconds. After that set the switch (7)
to the position «
0 » and unplug the unit.
• Remove the blender bowl (4) from the motor
unit (6).
•
Remove the lid (2) from the bowl (4) by lift-
ing the lock (3) and pulling it upwards.
• Remove the measuring cup (1) from the
lid (2), turning it counterclockwise.
• Pour out the soap solution from the bowl (4)
and rinse the bowl (4).
WARNING: The cutting edges of the knives
are very sharp and dangerous. Handle them
very carefully.
• Wash the measuring cup (1), the lid (2), the
bowl (4) with warm water, at temperature
not exc40°С, adding soft detergent
and then dry them.
• Clean the unit body with a soft damp cloth
and then wipe it dry.
• Do not use coarse sponges, abrasives and
solvents to clean the blender.
•
Do not immerse the blender motor
unit (6) into any liquids; do not wash it in
a dishwashing machine.
• Do not put the removable parts (1, 2, 4)
of the blender in a dishwashing machine
as well.
STORAGE
•
Perform the requirements of the CLEANING
AND CARE section before taking the unit
away for storage.
• Keep the unit in a dry clean place out of
reach of children and disabled persons.
DELIVERY SET
Table blender – 1 pc.
Manual – 1 pc.
TECHNICAL SPECIFICATIONS
Power supply: 220 –240 V ~ 50 Hz
Rated input power: 1200 W
Maximal power: 2000 W
Bowl capacity: 2 L
RECYCLING
For environment protection do not throw out
the unit and the batteries (if included), do not
discard the unit and the batteries with usual
household waste after the service life expira-
tion; apply to specialized centers for further
recycling.
The waste generated during the disposal of
the unit is subject to mandatory collection and
consequent disposal in the prescribed manner.
For further information about recycling of this
product apply to a local municipal administra-
tion, a disposal service or to the shop where
you purchased this product.
IM VT-8518.indd 5 03.07.2018 15:57:56